Instructions for Infinitt Integration
MouthWatch cameras easily integrate with Infinitt imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- From the menu, left-click Enter.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Configure Infinitt Settings
Confirm the Infinitt video capture settings match the configuration shown below.
Step 5 – Launch the Camera
Launch the camera using the icon shown below. You are now ready to begin capturing images.
Step 6 – All Set!
You are now ready to capture images directly into Infinitt.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)