Instructions for DentiView Integration
MouthWatch cameras easily integrate with DentiView imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Hover over Other Software, then hover over TigerView, and left-click TigerView 8.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Configure DentiView Settings
- In DentiView, go to Settings > Hardware and enable Video.
- From the DentiView main screen, select Video to open the capture interface.
- Click the settings (cogwheel) icon, then go to Video Settings.
- Enable both of the following options:
- Enable One Button Freeze and Save
- Enable DirectShow Button
- Click OK to save your settings.
Step 5 – Capture Intraoral Photos
With the patient selected, press the Video icon from the main screen to open the camera and begin taking photos.
Step 6 – All Set!
You are now ready to capture intraoral images directly into DentiView.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)