Instructions for SoPro Integration
MouthWatch cameras can be used with SoPro Imaging to capture intraoral photos and save them to the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Hover over Other Software, then select SoPro Imaging.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes, these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Configure SoPro Settings
- In the top-left corner, select File, then Setup.
- Open the Options tab.
If you see an option called Use the new video acquisition module, make sure it is unchecked. If you do not see this option, continue to the next step.
- Open the Shortcuts tab.
- For Frame Capture, set the shortcut to Ctrl+Shift+F (hold Ctrl and Shift, then press F).
- Open the Color Images tab.
- Set Video Source to USB Video Device.
- Make sure Return to live after capture is checked.
Step 5 – All Set!
You are now ready to capture images in SoPro. With MouthWatch Capture running in the system tray, each press of the camera capture button will capture an image and save it to the patient record.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)