Instructions for VaTech EzDent-i Integration
MouthWatch cameras easily integrate with EzDent-i. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
- A menu will display. Hover over Other Software, then left-click VaTech EzDent.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Capture Images in EzDent-i
With a patient selected, navigate to IO Camera. From the right toolbar, select the option shown below.
- Ensure USB Video Device is selected from the source drop-down on the left.
- Check the box for Default Sequence to capture multiple images.
Step 5 – All Set!
You are now ready to begin capturing images directly into EzDent-i.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)