Instructions for Oryx Cloud Integration
MouthWatch cameras easily integrate with Oryx Cloud–based software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Left-click Enter.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Plug the USB connector into a powered USB port. These are typically located on the front or back of the computer. USB ports on monitors may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once connected, the MouthWatch Capture icon should turn blue in the system tray, indicating the camera is detected.
Step 4 – Oryx Cloud
With a patient selected, navigate to Intraoral from the left toolbar as shown below.
- Hover your mouse over a tooth and select Capture to open the camera window.
Step 5 – All Set!
You’re now ready to capture intraoral images directly into Oryx Cloud using your MouthWatch camera.
Need Additional Help?
If you need assistance with setup or troubleshooting, our support team is happy to help.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)