Instructions for EVAsoft Integration
MouthWatch cameras easily integrate with EVAsoft. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Left-click TWAIN.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Select the Device in EVAsoft
With a patient selected, navigate to Image Devices from the top toolbar and select TWAIN-MouthWatch from the list.
Launch the camera using the Start Endo Exposure Mode icon within EVAsoft.
Step 5 – Capture and Save Photos
Start an intraoral exam. Each time you press the capture button on the camera, an image will be captured.
After capturing images, click Scan to save them to the patient record.
If you do not see a TWAIN option under Image Devices, you may need to enable TWAIN devices using the EVAsoft Configuration Tool. After enabling TWAIN devices, restart EVAsoft.
All Set!
You are now ready to begin capturing images directly into EVAsoft.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)