Instructions for DTX Studio Integration
MouthWatch cameras easily integrate with DTX Studio imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- From the menu, left-click Enter to select it.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Plug the USB connector into a powered USB port. These are typically located on the front or back of the computer. USB ports on monitors may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Capture Images in DTX Studio
Select your patient, then click Capture from the top toolbar in DTX Studio.
- Select MouthWatch from the list of available devices.
- The camera will launch and you can begin taking photos.
Step 5 – All Set!
You’re now ready to capture intraoral images in DTX Studio using your MouthWatch camera.
Need Additional Help?
If you need assistance with setup or troubleshooting, our support team is happy to help.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)