Instructions for ClearDent Integration
MouthWatch cameras easily integrate with ClearDent imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Left-click Space.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Plug the USB connector into a powered USB port. These are typically located on the front or back of the computer. USB ports on monitors may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once connected, the MouthWatch Capture icon should turn blue in the system tray, indicating the camera is detected.
Step 4 – ClearDent
With a patient selected, navigate to the Intraoral Imaging button on the left side.
- Select USB Video Device from the device list.
Step 5 – Capture Intraoral Photos
The camera window will open and you can begin taking photos. When finished, click Close in the lower right corner to save the images to the patient record.
Step 6 – All Set!
You’re now ready to capture intraoral images in ClearDent using your MouthWatch camera.
Need Additional Help?
If you need assistance with setup or troubleshooting, our support team is happy to help.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)