Instructions for IDentalSoft Integration
MouthWatch cameras easily integrate with IDentalSoft imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Select Twain from the list.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Plug the USB connector into a powered USB port. These are typically located on the front or back of the computer. USB ports on monitors may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Open the Camera in IDentalSoft
With a patient selected, from the Imaging page, select the Twain icon in the upper right (marked in red below).
- Select MouthWatch from the list.
Step 5 – Capture Intraoral Photos
The camera will open and you can begin taking photos. When finished, click Scan in the lower right to save photos to the patient record.
Step 6 – All Set!
You’re now ready to capture intraoral images in IDentalSoft using your MouthWatch camera.
Need Additional Help?
If you need assistance with setup or troubleshooting, our support team is happy to help.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)