Instructions for DBSWIN Integration
MouthWatch cameras easily integrate with DBSWIN Imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
Download MouthWatch Capture ⬇ Download MouthWatch Capture
Important:
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
- A menu will display. Hover over Other Software, then left-click DBSWIN.
Quick Tip:
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
Important:
If setting up a MouthWatch Plus+, use a USB 3.0 port.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the MouthWatch camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Configure DBSWIN
Important:
If you do not see Video as an option in the configuration, contact DBSWIN support to have the Video module installed/enabled.
If you do not see Video as an option in the configuration, contact DBSWIN support to have the Video module installed/enabled.
- Under the Config menu, select Video.
- Select Video Source 1.
- Set Control Method to WDM.
- Set WDM Driver to USB Video Device.
Step 5 – Open the Video Tab and Capture Images
- In DBSWIN, select the Video tab.
- You should see live video streaming.
- Press the camera capture button to take still images.
- Captured stills will appear as thumbnails on the left and will save to the patient record.
Step 6 – All Set!
You are now ready to begin capturing images directly into DBSWIN.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)