Instructions for VixWin Integration
MouthWatch cameras easily integrate with VixWin imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
Once installed, right-click the MouthWatch Capture icon in the system tray. From the menu, left-click VixWin.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Open a Mount in VixWin
With VixWin running, select your patient and create a new mount or open an existing one.
Step 5 – Launch the MouthWatch Capture Video Window
MouthWatch Capture uses an external video window to stream and capture images. To launch live video, double-click the blue MouthWatch Capture icon.
Step 6 – Use the Camera Control Tool
When the Camera Control window opens, confirm the Camera Selection is set to USB Video Device.
Once the live video stream is visible, each press of the capture button on the camera handle will freeze an image and place it directly into the VixWin mount.
When the mount is full, additional images will appear as thumbnails along the bottom of the screen.
Step 7 – All Set!
You are now ready to begin capturing images to help patients better understand their oral health, treatment needs, and the importance of proper dental care.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)