Instructions for MacPractice Integration
MouthWatch cameras easily integrate with MacPractice version 5.0. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
If you have an newer version of MacPractice, the video will display, but button capture is not enabled.
Step 1 - Plug in the MouthWatch Camera
Make sure that you plug the USB connector into a powered USB port. Sometimes, these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+ use a USB 3.0 port.
Step 2 - Select the USB Video Device
From the main screen, you will launch the camera using the camera icon located in the lower left corner of MacPractice.
- A live video feed will stream into the image window
- Clicking the capture button on the camera will save a still photo to the layout at right
- When you close out, the images will be saved to the patient record
Step 3 – All done!