Instructions for Carestream Integration
MouthWatch cameras easily integrate with Carestream Dental imaging software. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.
Step 1 – Download the Button Capture Software
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.
- Once installed, right-click the MouthWatch Capture icon in the system tray.
- Select TWAIN from the Button Capture Software menu.
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.
Step 2 – Plug in the MouthWatch Camera
Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.
If setting up a MouthWatch Plus+, use a USB 3.0 port.
Step 3 – Confirm MouthWatch Capture Detects the Camera
Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.
Step 4 – Select MouthWatch in Carestream
In Carestream, go to File, TWAIN, then Select Source. Choose MouthWatch and click OK or Close.
Step 5 – Capture Images
Once in the patient record, click TWAIN to launch the camera.
- This will launch the video capture window.
- After taking images, close the camera using the X in the top right corner.
Do not click Scan. - Click the TWAIN icon on the toolbar again to upload all images at once.
Step 6 – All Set!
You are now ready to begin capturing images directly into Carestream.
Need Additional Help?
If you need help with setup, our support team is happy to assist.
📧 support@mouthwatch.com
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)